Industrial Floor Coatings in Fontana, CA
Warehouse, plant and distribution floors that take forklift traffic and hold their safety markings. Installed by our own crew across Fontana.
Industrial Floor Coatings in Fontana, done right.
Warehouse, plant and distribution floors that take forklift traffic and hold their safety markings. We work Fontana from the older streets near the Sierra Avenue corridor out to the newer north side tracts, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.
We apply industrial floor coatings across Fontana and the surrounding area, including Rialto, Jurupa Valley, Rancho Cucamonga, Riverside.
What's included
- Hard-wearing systems for machine shops, warehouses and plant floors
- Safety striping, walkways and bay marking laid in as part of the floor
- Chemical and impact resistance specified to the actual process on the floor
- Phased and out-of-hours work to keep a facility running
- Old coatings and mastic removed by our own crews first
- Fifty years of large-area preparation
Built for Fontana homes.
Fontana runs from long-settled neighborhoods with genuine industrial heritage up to newer developments on the north side. It is also one of the biggest warehouse and distribution centers in Southern California, which means a large share of our Fontana work is on floors measured in acres rather than square feet.
On the residential side Fontana is hot and largely unshaded, particularly on the newer north side tracts, so exterior work follows the same UV logic as the rest of the inland valley: stains and textured coatings outside, epoxy in the garage.
Warehouse and distribution floors dominate the commercial side here. Those slabs take constant forklift traffic, and the failures are predictable — abrasion down the main aisles, impact damage at the dock and racking positions, and old coatings from previous tenants that never bonded properly to begin with.
Industrial Floor Coatings jobs near Fontana
Colors for industrial floor coatings in Fontana
Color is the decision most people find hardest, so we bring the boards to Fontana and make it easy.
Industrial Floor Coatings in Fontana, questions
How do you handle a distribution center that runs around the clock?
By phasing and working the hours you are not. Sectioning a floor and taking it in an agreed order — nights, weekends, planned shutdown windows — is standard for us. Give us the real operating constraints and we will scope to them.
Can you coat our floor without shutting the plant down?
Usually, by phasing it. We section the floor, work bays or aisles in an agreed order, and schedule around your shifts — nights and weekends included. It takes longer overall and it costs more than an empty building, and we will say so plainly, but it is far cheaper than stopping production.
Our floor takes forklifts and dropped steel. What holds up?
That depends on the specific abuse. Point impact, abrasion from steel wheels and chemical attack are three different problems and they lead to three different builds. Tell us what actually happens on that floor and we will specify for it rather than quoting a standard system and hoping.
Advice on industrial floor coatings
Can You Coat a Concrete Floor With Oil Soaked Into It?
Oil is the one thing on a slab that stops any coating bonding. Most oil-stained garage and shop floors can still be coated, but it depends on how deep the oil has gone. Here is how to tell, and what it takes to get it out.
Read the guide →Can Your Existing Concrete Slab Be Polished? What Decides the Result
Most slabs can be polished, but the slab decides how the floor turns out. Hardness, flatness, what is on it now, and the cracks and joints already in it all show in the finish. Here is how to read yours.
Read the guide →Grinding, Shot Blasting or Scarifying: How Old Coatings Come Off Concrete
Epoxy, paint, sealer, mastic and thinset each come off concrete differently. Pick the wrong method and you lose days or damage the slab. Here is how the choice gets made.
Read the guide →
Every coating we apply in Fontana, CA
-
FontanaTennis & Pickleball Court Coating Removal in Fontana
Removing old acrylic court coatings back to the slab — the work this company started on in 1976.
Learn more → -
FontanaInterior Concrete Staining in Fontana
Interior slabs stained in copper, amber, brown, gray and terracotta tones, then sealed to a gloss or satin finish. The color goes into the concrete, so it reads like stone rather than paint.
Learn more → -
FontanaPolished Concrete in Fontana
Existing slabs ground and polished to a hard, reflective finish. There is no coating on top to peel or chip — the shine is the concrete itself.
Learn more → -
FontanaMicrotopping & Concrete Overlays in Fontana
A thin overlay applied straight over the concrete you already have — knock-down texture, flagstone, tile, brick or cobblestone patterns, without tearing the slab out.
Learn more → -
FontanaExterior Concrete Staining in Fontana
Driveways, patios, walkways and steps stained and sealed — color that soaks into the concrete rather than sitting on it.
Learn more → -
FontanaRock Staining in Fontana
Rock features, waterfalls and boulders recolored to match the deck around them, so the whole setting reads as one piece.
Learn more →
Industrial Floor Coatings in nearby areas
Also in Fontana: Concrete Resurfacing · Concrete Coating Removal · Epoxy Floor Coatings · Pool Deck & Patio Coatings · Garage Floor Coatings
Ready to start your Fontana project?
Free on-site estimate, clear pricing, and a crew that shows up when we say we will.