Industrial Floor Coatings in Riverside, CA
Warehouse, plant and distribution floors that take forklift traffic and hold their safety markings. Installed by our own crew across Riverside.
Industrial Floor Coatings in Riverside, done right.
Warehouse, plant and distribution floors that take forklift traffic and hold their safety markings. We work Riverside from the Mission Inn blocks and Wood Streets out to the groves along Victoria Avenue, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.
We apply industrial floor coatings across Riverside and the surrounding area, including Jurupa Valley, Fontana, Rialto, Moreno Valley.
What's included
- Hard-wearing systems for machine shops, warehouses and plant floors
- Safety striping, walkways and bay marking laid in as part of the floor
- Chemical and impact resistance specified to the actual process on the floor
- Phased and out-of-hours work to keep a facility running
- Old coatings and mastic removed by our own crews first
- Fifty years of large-area preparation
Built for Riverside homes.
Riverside is the oldest city we work in regularly and it shows in the concrete. The Wood Streets and the blocks around the Mission Inn carry genuinely historic slabs and porch work; the post-war tracts east of there carry another era again. Very little of it is young, and almost none of it needs replacing.
Riverside also gives us a lot of commercial work. The industrial stock along the freeway corridors brings warehouse floors, machine shops and the coating removal that goes with buildings which have changed hands several times and been coated by several different people.
Older concrete rewards restraint. On the historic Riverside blocks the right answer is usually to restore what is there — clean it, deal with the cracks, and color it in a way that suits the age of the house — rather than lay something modern over the top that fights the architecture.
Industrial Floor Coatings jobs near Riverside
Colors for industrial floor coatings in Riverside
Every color below is photographed from a real sample board — the same ones we carry to Riverside jobs.
Industrial Floor Coatings in Riverside, questions
How far back does your experience with Riverside concrete go?
We started in 1976 and have worked across Riverside County ever since. Fifty years in one region means we have generally seen how a given era of local concrete behaves before we quote on it.
Do you lay the safety striping as well?
Yes. Aisle markings, walkways, bay outlines and hazard striping go in as part of the floor rather than being painted on afterwards, which is why they last as long as the coating around them instead of wearing off within the year.
How do you handle a floor that has oil soaked into it?
Carefully, and honestly. Machine shop slabs can hold decades of oil. Mechanical removal and degreasing get most floors clean enough, but some areas keep bleeding and need a different approach or an accepted compromise. We would rather have that conversation at the estimate than watch a coating lift over the press pit six months later.
Advice on industrial floor coatings
Floor Coatings for Commercial Kitchens and Breweries: What the Floor Has to Survive
A kitchen or brewery floor is wet, hot, greasy and washed down every day, and it has to pass an inspection. This is what those floors put a coating through, what to specify, and how to get the work done without closing for long.
Read the guide →Epoxy Floors for Auto Repair Shops and Service Bays: What Holds Up
A service bay floor takes oil, fluids, hot tires, jacks and dropped tools every working day. Here is what that does to bare concrete and thin coatings, and what a shop floor needs to last.
Read the guide →Can You Coat a Concrete Floor With Oil Soaked Into It?
Oil is the one thing on a slab that stops any coating bonding. Most oil-stained garage and shop floors can still be coated, but it depends on how deep the oil has gone. Here is how to tell, and what it takes to get it out.
Read the guide →
Every coating we apply in Riverside, CA
-
RiversideTennis & Pickleball Court Coating Removal in Riverside
Removing old acrylic court coatings back to the slab — the work this company started on in 1976.
Learn more → -
RiversideInterior Concrete Staining in Riverside
Interior slabs stained in copper, amber, brown, gray and terracotta tones, then sealed to a gloss or satin finish. The color goes into the concrete, so it reads like stone rather than paint.
Learn more → -
RiversidePolished Concrete in Riverside
Existing slabs ground and polished to a hard, reflective finish. There is no coating on top to peel or chip — the shine is the concrete itself.
Learn more → -
RiversideMicrotopping & Concrete Overlays in Riverside
A thin overlay applied straight over the concrete you already have — knock-down texture, flagstone, tile, brick or cobblestone patterns, without tearing the slab out.
Learn more → -
RiversideExterior Concrete Staining in Riverside
Driveways, patios, walkways and steps stained and sealed — color that soaks into the concrete rather than sitting on it.
Learn more → -
RiversideRock Staining in Riverside
Rock features, waterfalls and boulders recolored to match the deck around them, so the whole setting reads as one piece.
Learn more →
Industrial Floor Coatings in nearby areas
Also in Riverside: Concrete Resurfacing · Concrete Coating Removal · Epoxy Floor Coatings · Pool Deck & Patio Coatings · Garage Floor Coatings
Ready to start your Riverside project?
Free on-site estimate, clear pricing, and a crew that shows up when we say we will.