Concrete coating and resurfacing in Wildomar, done right.
Resurfacing concrete since 1976 — fifty years in the same trade
- 50+ years
- Licensed #641729
- 5 years material one year labor
Concrete Coatings services across Wildomar
-
Concrete Resurfacing
Resurfacing and restoring the concrete already there — interior slabs, patios, driveways and walkways — so it looks new instead of being torn out.
Learn more → -
Concrete Coating Removal
Stripping failed or unwanted coatings back to sound concrete — for our own jobs, and for contractors without the equipment to do it properly.
Learn more → -
Epoxy Floor Coatings
Epoxy and flake systems laid over prepared concrete, from a single garage bay to a full commercial floor.
Learn more → -
Pool Deck & Patio Coatings
Textured, cool-to-the-touch coatings for pool decks, patios and splash pads, laid over the concrete already there.
Learn more → -
Garage Floor Coatings
Garage and driveway floors prepared properly and finished in epoxy, flake or stain.
Learn more → -
Industrial Floor Coatings
Hard-wearing coatings and safety striping for machine shops, warehouses and plant floors.
Learn more → -
Tennis & Pickleball Court Coating Removal
Removing old acrylic court coatings back to the slab — the work this company started on in 1976.
Learn more → -
Polished Concrete
Existing slabs ground and polished to a hard, reflective finish. There is no coating on top to peel or chip — the shine is the concrete itself.
Learn more → -
Microtopping & Concrete Overlays
A thin overlay applied straight over the concrete you already have — knock-down texture, flagstone, tile, brick or cobblestone patterns, without tearing the slab out.
Learn more → -
Exterior Concrete Staining
Driveways, patios, walkways and steps stained and sealed — color that soaks into the concrete rather than sitting on it.
Learn more → -
Rock Staining
Rock features, waterfalls and boulders recolored to match the deck around them, so the whole setting reads as one piece.
Learn more →
Why homeowners choose David Paul Foster Co.
Resurfacing concrete since 1976 — fifty years in the same trade
Our own crews do the prep and the install. Nothing is subcontracted
We remove old coatings — on our own jobs and for contractors without the equipment to do it properly
Thousands of tennis courts resurfaced — millions of square feet of prep and coating
Employees who have been with the company over thirty years
Preparation is the job. Coatings bond because the concrete was prepped right
Free on-site estimates across Riverside, San Diego, Orange, LA and San Bernardino counties
Concrete can almost always be restored — and we will tell you straight if it cannot
Serving Wildomar and the surrounding area
- Wildomar CA
- Temecula CA
- Murrieta CA
- San Diego CA
- Riverside CA
- Chula Vista CA
- San Bernardino CA
- Fontana CA
- Moreno Valley CA
- Oceanside CA
- Ontario CA
- Rancho Cucamonga CA
- Escondido CA
- Corona CA
- Victorville CA
- Carlsbad CA
- El Cajon CA
- Menifee CA
- Hesperia CA
- Rialto CA
- Jurupa Valley CA
- Vista CA
- San Marcos CA
- Indio CA
- Chino CA
- Chino Hills CA
- Upland CA
- Mira Mesa CA
- Hemet CA
- Apple Valley CA
- Redlands CA
How it works
- Step 1
Book a free on-site estimate
Call or book online. Dave runs estimates Tuesday through Thursday and comes out to look at the concrete himself.
- Step 2
We tell you straight
Concrete can almost always be restored. If yours is too far gone to save, we will tell you that instead of selling you a coating that will fail.
- Step 3
Prep is the job
Fifty years and millions of square feet have taught us that coatings bond because the concrete was prepared right. That is where the work goes.
- Step 4
Our own crew, guaranteed
Nothing is subcontracted. Our crews do the prep and the install, and the work is backed by five years on material and one year on labor.
Ready for your free on-site estimate?
Free on-site estimate, clear pricing, and a crew that shows up when we say we will.
Common questions
Do I have to replace my concrete, or can it be saved?
Almost always it can be saved. Most of the concrete people call us about intending to replace does not need replacing — the slab is sound and the surface has aged. Resurfacing keeps the concrete, the footings and the drainage that already work and skips the demolition entirely, at a fraction of the cost. When a slab genuinely has failed we will tell you so rather than sell you a finish that fails with it.
Why do concrete coatings peel, and how do you prevent it?
Nearly every failed coating we strip failed because the concrete was never opened up before it was coated. If the slab is sealed, dusty, oily or holding moisture, a coating has nothing to grip and lets go in sheets a year or two later. We grind every floor mechanically with diamond tooling before any product goes down. That step is most of the cost and all of the reason it lasts.
Can you go over the coating that is already on my concrete?
Usually we will not, and that is deliberate. Coating over a failing coating buys you the same failure in a new color. Removal is a service in its own right for us — we do it for other contractors as well as on our own jobs — so taking the old system off is straightforward work rather than a reason to walk away from the job.
How much does a concrete coating cost?
It depends on the area, the condition of the slab and how much old material has to come off first, which is why we do not publish a square-foot price that would be wrong for most jobs. The estimate is free and on site, and Dave gives you a real number for your concrete rather than a range you have to guess inside.
How long have you been doing this?
Since 1976 — fifty years in the same trade. We started on tennis courts and still strip them today, alongside pool decks, garage floors, driveways, patios, warehouse and industrial floors. Several of our crew have been with the company over thirty years.
Which areas do you cover?
We work from our yard in Wildomar across Riverside, San Bernardino, San Diego, Orange and Los Angeles counties — 31 cities from the high desert down to the coast. Estimates are free and on site anywhere in that area.
Do you subcontract any of the work?
No. Our own crews do the removal, the preparation and the finish. The people who grind your slab are the people who coat it, and that is the only way we have found to keep the standard consistent from the first pass to the last.
What warranty do you give?
Five years on material and one year on labor, on every job. We are licensed in California under number 641729.