Skip to content
Fifty years of turning tired concrete into something to be proud of. (800) 958-7471
Epoxy Floor Coatings, Hemet, CA

Epoxy Floor Coatings in Hemet, CA

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. Installed by our own crew across Hemet.

Epoxy Floor Coatings installed in Hemet, CA by David Paul Foster Co.
Why David Paul Foster Co. in Hemet

Epoxy Floor Coatings done right, the first time, in Hemet.

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. We work Hemet from the older downtown grid out across the valley floor toward San Jacinto, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.

We apply epoxy floor coatings across Hemet and the surrounding area, including Menifee, Murrieta, Moreno Valley, Temecula.

What's included

  • Epoxy and flake systems over properly prepared concrete
  • Diamond grinding first — never a wash-and-roll job
  • Single garage bays through to full commercial floors
  • Flake blends, solid colors and clear topcoats to suit the space
  • Old failed epoxy stripped by our own crews before anything new goes down
  • Five years on material, one year on labor
Epoxy Floor Coatings in Hemet

Built for Hemet homes.

Hemet sits on the floor of the San Jacinto Valley, and it is one of the hotter, drier places we work. It also carries a lot of older housing stock, which means older concrete — slabs that have been in the ground for decades and have generally been coated, painted or sealed at least once before we see them.

The valley heat then decides what goes back on. Summer here is long and genuinely hot, and a dark finish on an exposed patio or pool deck is a mistake you feel for four months of the year. We steer accordingly.

Older concrete is the defining feature of Hemet work. Slabs poured decades ago that have taken a hard climate ever since, often with a home-applied sealer or patio paint somewhere in their history. The first job is usually finding out what is on the concrete and whether it comes off cleanly.

Recent work

Epoxy Floor Coatings jobs near Hemet

  • Bronze flake epoxy floor curving down a commercial hallway past a blue column
  • Long bronze flake epoxy corridor in a commercial building
  • Gray flake epoxy floor with a timber pallet resting at the edge
  • Close view of gray and black flake broadcast into a clear epoxy topcoat
  • Gray flake epoxy floor with a stainless trench drain and coved wall base
  • Gray flake epoxy floor beside a stacked timber pallet
  • Close view of an electrical company logo inlaid into a gray flake epoxy floor
  • Company crest inlaid into speckled gray flake epoxy at floor level
  • Retail sales floor in tan flake epoxy with a round logo inlay near the counter

Colors for epoxy floor coatings in Hemet

Every color on the board, and we bring the boards to you in Hemet.

See every color chart →
  • A fan of flake chip sample boards in gray, blue, black and tan blends
  • Flake chip sample boards spread out to show the range of gray, blue and earth blends
Hemet FAQs

Epoxy Floor Coatings in Hemet, questions

How much difference does color make in the Hemet heat?

A great deal, and more here than in most places we work. The valley gets a long, hot summer with little relief. A light, textured finish on an exposed patio or pool deck stays usable through August in a way a dark one simply does not.

Why does epoxy peel, and how do you stop it?

Epoxy peels for one reason nearly every time: it was put over concrete that was not opened up first. If the slab is sealed, dusty, oily or still holding moisture, the coating has nothing to grip and it lets go in sheets a year or two later. We grind every floor mechanically before a drop of product goes down. That step is most of the cost and all of the reason it lasts.

Can you go over the epoxy that is already on my floor?

We would rather not, and usually we will not. Coating over a failing coating buys you the same failure with a new color on it. Removal is a service in its own right for us — we do it for other contractors as well as on our own jobs — so taking the old system off is straightforward work rather than a reason to walk away.

Also in Hemet: Concrete Resurfacing · Concrete Coating Removal · Microtopping & Concrete Overlays · Exterior Concrete Staining · Rock Staining

Ready to start your Hemet project?

Free on-site estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate